BMW R1200R R1150R/T F800 K1200R R1100R/T R1250R RnineT Message Board

That does look good better than some of the ideas of half fairings and gigantic screens a bit too much black on the bike I have the silver engin and light wheels grey tank,

A guy on the other board has the Vario screen on and I had one on a GSX 14 it worked very good so I will give that a try if not revert back to the orig bars and screen

Is there no one out there!!!!!!!!!!!!!!!!!!?

Hi all,

I have the MV handlebars fitted and the sports screen at the moment, but would like to know if anyone has the risers with another screen and what one might be recommended to eliminate a lot of head wobble

Never had a squeal Bry

Only got to cover 686 kliks over the last two days since I got the update done and also the brakes,; as for the software update quite simply put ..... it is a different bike (for the better) it runs smoother and did not flinch once doing town riding or slow in traffic not like before where it was li...

Taken as said

Thank you for that Mike, in the few miles I have done so far it is a totally different bike, at lower revs and slow speeds ie traffic and town, just finished putting a new back rubber band on for the forthcoming run (Starts Sunday ends Monday generally at a "cough cough" brisk pace) will l...

Got the new rotors and banjo bolt fitted as well as the V6 software update it really does seem to do the job on smoothing out the lower end. Due for several hundred miles test this weekend.

Does anyone have access to the V6 update on paper for the 12R thanks for that DJ

Hi Cup O Just to add a to your first posting as there is very little info out there unless you dig for it The K1200R and S are among the affected. In the case of the R, a complete replacement of the front brake and rotor are also required. on certain chassis numbers, (could be from 4mm to 5mm disks)...

Do you have a pic of the cf handguards ??? or an address to look at them??
Thanks

I have bought the 80mm risers not the ones in the pictures they do look a bit high.
Anyone know what the screen make is ????

thanks Martydallas for the info got the risers and the rest of the bits are supposed to be on the way hopefully get it done over the Christmas break.

They did say I had the latest mapping but there was a possible problem on the oxygen sensors in a batch of bikes but mine was not in the listings that had this problem but it really has to be sorted twice now moving away from lights it jerked mid turn at crossroads and also at roundabouts. Brilliant...

Anyone fitted the handlebar risers if you did how do you find them and did it take long to do ????? ie the beemer approved set.???

Only a little over 2k on the clock new bike and all mapping was to be updated at first service (a couple of weeks ago) but on checking it was the latest updates, they (the bike shop) have suggested it may be a fault in the breather section but as yet it cannot be taken in until next thursday week. S...

Thanks for that redbaron 1 any other suggestions gratefully accepted

Can anyone tell me if the 12 has solved the problem I have been told I have the latest mapping and do not doubt it but I do have a difficulty as I am finding it rather off putting in low gear and at low speeds chuching and surging, especially in slow city traffic , any tricks to overcome this proble...

I have fitted the new and available Scorpion titanium boys o boys what a sound probably on the too racer sound, and draws a lot of attention.