BMW R1200R R1150R/T F800 K1200R R1100R/T R1250R RnineT Message Board

OK.. Sycospain.. What "dual" function bulb are you referring to? The horizontal clear window plate above the plate for plate illumination is a two wire single filament bulb. Brown/Grd - & Gray/w blue +. This bulb Wagner 68161 12 V 6 watt was replaced 7 years ago. Now further up over th...

Erased

I've a three wire brake & tail light license plate frame...wires are White/Red /Black when connecting these wires to a 12 volt battery on the bench, the frame works like this. Black=ground-/White=tail+/Red=stop+ No matter how I connect to the bikes tail light bulb terminals I can not get tail &a...

My bikes red, so its the red fairing piece that starts at the end of the seat to the rear of tank, along both sides of the bike?
that thin plastic strip?

Commonnn mannnn, really?
You do got some miles though...

What have you done to close the gap up front on the "side cover" or seat flare . The peg no longer adheres to the grommet. I'll order the grommet & in the meantime try to build up the peg with clear RTV to create more of a plug.. Maybe 3M velcro would work also,only you'd have to remov...

You my friend, have done a beautiful job..Very nice..

Exactly, I've never done this my lonesome... The dealer has always performed this service..System has always performed well before service.
I've never been around in the service area "after".. Hence the question? I guess the answer is no, only if you've a fault..
Thank you..still learning..

I was reading posts over on the "Rockster" side.. I'm doing bleed & flush on R1150R in the next few days..
Do fault codes have to be reset by a dealer after a flush & fill or just when you've had flashing light/problems? fault..
Thanks...

Looking for torque wrench recommendations for R1150R maintenance & repair..
What do you find useful?
Thanks..

Do you mean stepping on the rear brake pedal ONLY you get no servo assist sound?

Yes that's the information I got too. The fronts were on back order, Kirby on e bay has them.
Rad...

OK.. Got it... Right in front of me.. Thanks

Hello: I've been researching the bleeding process of the 2004 R1150R & can't find that great write up & pictorial of the process.. it's been just a couple days ago. Can someone post the link again please..
Thank you..

OK.. Done... Not too bad at all.. purchased a close quarters drill for the rivet drilling & rivet tool..Inexpensive e bay items.. The system Case unit came fully assembled & complete. Only required removal of lock barrel, rivets, & install unit & new supplied rivets. Thanks for the a...

Hey.. Anyone know the part # for speed bleeder for 2004 R1150 R BMW calipers. Mines not listed on the site. 02 & 03 are & R1150RS is though..
Whats RS?
Thanks, Steve

4 mm or 5/32 Thought my dremel would do it but the chuck is too small.. No problem though, we got that..
Thanks. Steve

OK.. Thanks. Been looking at everything that's out there on the repair & seems straight forward enough..
I've read were the rivets are an "off sized" that come in the repair package.. Will any rivet tool work for the job?

Hello All.. I've ordered the parts #46 54 2 307 620 to repair my saddlebag that I lost & then found again when the clamp that holds it to the bike broke.. Has anyone done this repair? & can maybe offer some advice or do's & don'ts. There is a PDF on the repair parts page.. Thanks.. great...

So I lost my right side bag.. Not a bit of damage except for the two "hooks" on top ground down slightly. But the big thing is... the clamp that works in the center of the bag when the handles are closed has broken.. Is this part replaceable ? like the lock & cylinder? Has anyone remov...