Search found 318 matches

by Oilhead
Fri Dec 19, 2014 10:58 pm
Forum: R1150R (2001-2005)
Topic: Clutch Spline Failure Analysis
Replies: 216
Views: 66537

Re: Clutch Spline Failure Analysis

Keppelj wrote:says it occurs in a small percentage of all oil-heads, about 10% of them, and they wouldn't prophylactically do the fix without first diagnosing the failure. Hmmmm.
Did your mechanic really say 10%? That's a lot! :shock: I certainly would not consider that a small percentage. 8-[
by Oilhead
Sat Jul 19, 2014 6:51 pm
Forum: R1200R (2006-2014)
Topic: Corbin seat experience
Replies: 21
Views: 8889

Re: Corbin seat experience

I've always gotten great service from Corbin. They answer emails super quick; unlike Sargent who don't even reply to emails after they screw up.
by Oilhead
Sat Jun 21, 2014 6:42 pm
Forum: R1200R (2006-2014)
Topic: Corbin seat experience
Replies: 21
Views: 8889

Re: Corbin seat experience

I've had several Corbin's, and while they are sturdy and well made, they are heavy (fiberglass) and they NEVER fit properly without some modification -- inexcusable. That said, after several hours on them, I wasn't thinking about the saddle. A much better choice in turnkey saddles is Sargent, thoug...
by Oilhead
Tue Jan 07, 2014 9:55 pm
Forum: R1150R (2001-2005)
Topic: Bark busters
Replies: 8
Views: 4956

Re: Bark busters

Shaggy 473 wrote:Do you have any pictures of the barkbusters installed?
Image
by Oilhead
Sun Oct 06, 2013 8:17 am
Forum: R1150R (2001-2005)
Topic: Diagram of Cable Ties?
Replies: 25
Views: 10696

Re: Diagram of Cable Ties?

Is this about the Technical Service Bulletin about the instrument wiring harness being chafed or pinched? My dealer gave me a copy of the TSB one day when I was there for a new tire (I didn't have the bike with me). The service advisor said it was not covered under any warranty (my bike was out of ...
by Oilhead
Fri Jun 14, 2013 1:18 pm
Forum: R1150R (2001-2005)
Topic: Balanced on Center Stand?!
Replies: 15
Views: 3375

Re: Balanced on Center Stand?!

Without a shadow of a doubt, BMWs have the best centerstands of any bike manufacturer! :D
by Oilhead
Mon Apr 01, 2013 6:24 am
Forum: R1150R (2001-2005)
Topic: Air filter access
Replies: 13
Views: 4175

Re: Air filter access

Flatter, as in not as tall? If so, how does it make the seal to the top of the airbox (underside of the cover) to keep dirt out of the engine? Yes the height is the same, it is the overall diameter that is significantly larger on the OEM filter. Here are pics for comparison. http://www.teileineile....
by Oilhead
Sun Mar 31, 2013 2:03 pm
Forum: R1150R (2001-2005)
Topic: Consumer Reports tests Motorcycles
Replies: 7
Views: 2857

Re: Consumer Reports tests Motorcycles

Hm. 4,700 bikes is statistically significant. Let's see... How many brands of bikes are there? How many models do each brand have? How many of each model were sold? 4700 is not even close to being a significant sample size. Furthermore how many of each bikes were surveyed? How many of the smaller m...
by Oilhead
Sun Mar 31, 2013 1:07 pm
Forum: R1150R (2001-2005)
Topic: Consumer Reports tests Motorcycles
Replies: 7
Views: 2857

Re: Consumer Reports tests Motorcycles

CR "surveys" are so flawed and sample size so small that it is statistically "invalid". I personally would not put any validity to anything they say. They have been sued so many times and have been able to weasel and slilther out of it because "freedom of the press" is ...
by Oilhead
Sun Mar 31, 2013 11:15 am
Forum: R1150R (2001-2005)
Topic: Air filter access
Replies: 13
Views: 4175

Re: Air filter access

I have the K&N filter and it's literally a one minute process to remove or replace it.
by Oilhead
Sun Jan 13, 2013 6:19 pm
Forum: R1150R (2001-2005)
Topic: Fuel filter and parts for 2002 R1150R
Replies: 7
Views: 2849

Re: Fuel filter and parts for 2002 R1150R

When I did it, one of the plastic OEM quick disconnects cracked. It was a good opportunity to replace both of them with metal ones.
by Oilhead
Wed Jan 09, 2013 4:31 pm
Forum: R1150R (2001-2005)
Topic: Brake fluid
Replies: 3
Views: 1527

Re: Brake fluid

I just use a fresh bottle from my local NAPA. Like the guy above me said, as long as you are changing it regularly, any decent brand that meets specs is fine.
by Oilhead
Tue Dec 25, 2012 6:43 pm
Forum: R1150R (2001-2005)
Topic: Opaque oil level window
Replies: 6
Views: 2034

Re: Opaque oil level window

Boxer wrote:
I am wondering if engine has overheated and, if so, what to do?
Yes it has...and don't do THAT anymore. It has to have air flowing over the headers and engine to keep it cool.
+1

Even more detrimental if you are running it with the first idle "choke" lever on.
by Oilhead
Mon Nov 26, 2012 7:52 pm
Forum: R1150R (2001-2005)
Topic: Bark busters
Replies: 8
Views: 4956

Re: Bark busters

I have the Barkbuster Storm Handguards on my R1150R. They were very easy to install, looks nice IMO, and does block the wind somewhat, helping the heated grips retain more heat. :)
by Oilhead
Thu Nov 22, 2012 8:56 pm
Forum: R1150R (2001-2005)
Topic: R1150R Battery choice
Replies: 27
Views: 7244

Re: R1150R Battery choice

My 13 year old factory battery is starting to go That's quite impressive. My 2004 CBR600RR's battery will be 9 years old soon and still going strong. But considering the CBR starts instantaneously while the Oilhead has to crank for a full second or two, the battery lives a much easier life inside t...
by Oilhead
Wed Nov 14, 2012 9:00 am
Forum: R1150R (2001-2005)
Topic: R1150R Battery choice
Replies: 27
Views: 7244

Re: R1150R Battery choice

more cranking amps with the pc680. i got mine at batteries plus here locally for $150. it rocks! Does this translate to faster cranking speed? The Westco seems to crank at more than reasonable speed. Actually being so impressed with the Motolectric kit when I installed it on my Ducati 900SS, I got ...
by Oilhead
Wed Nov 14, 2012 8:54 am
Forum: R1150R (2001-2005)
Topic: Two-up Riding
Replies: 10
Views: 2983

Re: Two-up Riding

From memory, 36psi front and 42psi rear. I turn the rear suspension preload wheel clockwise a couple of full turns (a click each time). Yes your memory is correct on the pressure. :) As for the rear preload, I would crank it to full stiff. I'm only about 190 lbs and my girlfriend is about 108 lbs a...
by Oilhead
Tue Nov 13, 2012 9:59 pm
Forum: R1150R (2001-2005)
Topic: R1150R Battery choice
Replies: 27
Views: 7244

Re: R1150R Battery choice

I just got a Westco from Beemerboneyard. I like the fact that it's a direct replacement and it's an exact fit.

What is the advantage of the Odyssey over a direct replacement like the Westco?
by Oilhead
Sun Nov 11, 2012 8:12 pm
Forum: R1150R (2001-2005)
Topic: Jump Start Posts?
Replies: 20
Views: 9188

Re: Jump Start Posts?

BTW, almost 6 years later :oops: , I finally ended up getting the kit from Beemershop. :) Timing was very good as a week after I installed it, I ended up needing a jump and the guy in the pickup (another rider) pulled over to help me and there would have been no way his jumper cables would have reac...
by Oilhead
Mon Oct 29, 2012 5:27 pm
Forum: R1150R (2001-2005)
Topic: A-arm problem
Replies: 8
Views: 2533

Re: A-arm problem

acejones wrote:What's an a-arm ?
I assume the OP is talking about the front telelever. A-arm or wishbone is what automakers call their control arms for their suspension.

That being said, Beemerboneyard has one right now. http://www.beemerboneyard.com/teleleveraarms.html