My long wait is over

Topics related to the ownership, maintenance, equipping, operation, and riding of the R1150R.

Moderator: Moderators

Post Reply
TonyT47
Basic User
Posts: 19
Joined: Wed Sep 22, 2010 4:40 pm

My long wait is over

Post by TonyT47 »

Hi, folks, my name is Tony and I've been lurking on this board for a while, learning about these and other Beemers.
My patience has paid off, for I am now the new owner of a 2002 R1150R, in Atlanta Blue with the yellow seat. At least I think it's Atlanta Blue, a pale blue metallic.
It's a non-ABS model, complete with side bags, a couple of screens, some nice pin-striping and 66,0000 km on the clock.
I can hear the howls "spline failure, rear end failure imminent!" :badgrin: but that's why I chose this one, all that has happened and been fixed by a well-respected tech. The previous owner had it from new and kept meticulous records, all service done by Jesse McGrath in Ottawa, so I'm pretty confident in this machine. She joins my 1977 R100RS in the garage.
I've added a Givi top box and as soon as I've burned through this tank of gas I'm going to add a Stebel Nautilus horn.
Some observations:
She's so easy to ride! I like the way the engine torque comes in and matches so nicely with the gear ratios. Personally, I find the six-speed box great, top gear is very useable in normal use. Those who criticize it for being too tall should try a big V-Strom, where sixth is almost unusable below 120 kph.
Handling and suspension are fully up to expectations, too.
The seat's a nut-cracker isn't it? I shall be looking into the after-market for something less stressful for the boys. Perhaps it needs time to adjust to me, the previous owner was a lady. :biggrin:
The only downer has been the tool kit. I went to check the plugs and, using the knowledge I've gained on this Board, I used the OEM plug socket and tommy bar. At least I would have if the tommy bar had fit, but it is crimped at both ends and will not go through the hole in the socket. Am I missing something? Yes, I am, an un-busted screw driver. My bad.
So there we are, a new machine to pile the miles on, spend some farkle-funds on and enjoy for what I hope will be many years.
Anybody want to buy a nice 2004 V-Strom 1000???
Cheers,
Tony
Xdot
Member
Posts: 524
Joined: Fri May 28, 2010 2:38 pm
Donating Member #: 0
Location: Huntsville, Alabama
Contact:

Re: My long wait is over

Post by Xdot »

Welcome! :smt023
2017 Husqvarna 701
2007 Husqvarna TE250
2004 BMW Rockster
User avatar
towerworker
Lifer
Posts: 2371
Joined: Sun Jan 08, 2006 8:11 pm
Donating Member #: 575
Location: Staunton Virginia

Re: My long wait is over

Post by towerworker »

Let me add my welcome too! You've picked a fine machine and the folks on this board will add a valuable knowledge source. Don't hesitate to jump in!

Wayne
The Older I Get, The Less I know. (in honor of MikeCam
'05 RT
'04 R
'03 R
CB750
KZ750
HD 350 Sprint
twinpatrick
Basic User
Posts: 8
Joined: Fri Apr 22, 2011 12:58 pm

Re: My long wait is over

Post by twinpatrick »

Have the same bike, same color which I bought this year with just 8000 miles. I am thrilled with the performance and the attention I get even when it is parked. Put some maintenance money and new tires on it and I am good for the season. I am thrilled to be part of the BMW family and hope to see some of you at the rally in PA in July.
User avatar
rdsmith3
Lifer
Posts: 2632
Joined: Mon Mar 21, 2005 9:53 am
Donating Member #: 74
Location: Flanders, NJ

Re: My long wait is over

Post by rdsmith3 »

Welcome.

An Atlanta Blue R1150R?! You have questionable taste. ;)

Image

photo credit - J Slater
Bob
2002 Atlanta Blue
Lifetime Member #74
TonyT47
Basic User
Posts: 19
Joined: Wed Sep 22, 2010 4:40 pm

Re: My long wait is over

Post by TonyT47 »

Thanks, guys.
I do have one question: am I right in thinking that the 1150GS hand protectors are a straight bolt-on fitting for the R? I'm kinda used to the protection provided by the ones on the 'Strom.
See you at the Rally, Twinpatrick!
Cheers,
Ton
Coyne67
Lifer
Posts: 17
Joined: Mon May 16, 2011 2:31 am

Re: My long wait is over

Post by Coyne67 »

Thanks for the photos guys now I know what colour my new 1150 is :lol:

By the way anyone know where you can get the touring screens??
NoRRmad
Double Lifer
Posts: 3687
Joined: Fri Mar 18, 2005 4:47 am
Donating Member #: 388
Location: NYC

Re: My long wait is over

Post by NoRRmad »

TonyT47 wrote:Thanks, guys.
I do have one question: am I right in thinking that the 1150GS hand protectors are a straight bolt-on fitting for the R? I'm kinda used to the protection provided by the ones on the 'Strom.
Not exactly a straight bolt on -- you have to Dremel out a bit to clear the high-idle lever, but that's it.
#388 '02 R1150R Black: The darkest color.
Post Reply