Page 1 of 1

R1150R Indicator Lights flashing erractically

Posted: Wed Jan 02, 2008 2:26 am
by triumsg
Can anyone help? My R1150R turn signal indicator lights work fine. After a while of riding they suddenly blink quicker and sometimes revert to the normal flashing speed. Whats up? :?:

Posted: Wed Jan 02, 2008 5:33 am
by DJ Downunder
It's most likely a blown globe...check both back and front are flashing.

DJ

Posted: Fri Jan 04, 2008 1:06 am
by Nakigara
Same thing happened to me. I replaced all of the bulbs to no avail. I decided it must be the relay and popped the seat off to look. With the engine not running, I turned on my blinkers and started pulling relays until they quit. When I put the relay back in, the blinkers were fine. The relay had just come loose or there was some intermittent contact going on. Everything is still fine more than six months later!

Dan

Indicator Lights flashing erractically

Posted: Sat Jan 05, 2008 1:40 am
by triumsg
Thanks DJ and Dan.

As suggested, checked the globes. All were fine.

Removed the flasher relay (boy, is removing that fastner around the relay tricky!). Cleaned it with Philips contact cleaner and replaced it.

Took it for a short ride and everything seems fine.

Will take it for a longer ride soon!!

Thanks again guys!

Re: Indicator Lights flashing erractically

Posted: Sat Jan 05, 2008 2:42 am
by snowprick
triumsg wrote:Thanks DJ and Dan.

As suggested, checked the globes. All were fine.

Removed the flasher relay (boy, is removing that fastner around the relay tricky!). Cleaned it with Philips contact cleaner and replaced it.

Took it for a short ride and everything seems fine.

Will take it for a longer ride soon!!

Thanks again guys!
Was this the problem?

Signal Relay Connector
Image

Posted: Sat Jan 05, 2008 7:46 am
by triumsg
Hey there Snow - exactly! strange clip that!

Posted: Sun Jan 06, 2008 12:57 am
by triumsg
Thanks again guys - just back from a longish ride - more than an hour. No problems at all! Must have been a loose contact.

Posted: Tue Jan 08, 2008 1:51 am
by Nakigara
Glad I could be of some help. I don't know how people got along back in the days before message boards!

Dan