Page 1 of 1
OEM Mirrors
Posted: Wed Apr 16, 2008 2:45 pm
by marecycling
One of my OEM mirrors seems to have loosened up and sags on its own under way. These are the round black mirrors on a 2002. I saw no set screw, is there a way to tighten the head to prevent this sagging issue?
Re: OEM Mirrors
Posted: Wed Apr 16, 2008 3:53 pm
by NoRRmad
There's a Torx-head fastener on the bottom of the mirror fitting on the handlebars, just about concentric with the shaft that holds the mirror. Tighten this fastener while holding the mirror shaft steady. There's the proper Torx wrench in your tool kit.
Or did you mean that the mirror itself sags on the shaft?
Re: OEM Mirrors
Posted: Wed Apr 16, 2008 8:52 pm
by marecycling
The head of the mirror moves. If I start out with the coorect shoulder height setting, in an hour I am viewing the rear directionals? Any cure?
Re: OEM Mirrors
Posted: Thu Apr 17, 2008 1:50 am
by digga
sounds like a new mirror for you mate
i reckon that ball joint is sealed as such with no means of tightening
If there is a method of adjustment, i'd like to know! I think my o/s mirror will be soon pointing south if it gets much looser

Re: OEM Mirrors
Posted: Thu Apr 17, 2008 9:50 am
by rdsmith3
I have my used stock mirrors that are available for a very cheap price, if you need them.
Re: OEM Mirrors
Posted: Thu Apr 17, 2008 4:56 pm
by digga
Whilst we on the mirror subject again..
Which are the ones that look real neat on the RR? is it the ones from the K1200??
or have i got it completely wrong??
Re: OEM Mirrors
Posted: Thu Apr 17, 2008 5:12 pm
by OU812
I prefer these:

And a better view then stock!

Re: OEM Mirrors
Posted: Fri Apr 18, 2008 3:03 am
by GypsyRR
Those are nice, Steve. But I went with the CL mirrors. They seemed to fit the contour of my bike and the look of it from the front. I picked up used ones from Beemerboneyard.com

Re: OEM Mirrors
Posted: Fri Apr 18, 2008 6:28 am
by OU812
Kristy, mine are CL mirrors also. Maybe just a different model.

Re: OEM Mirrors
Posted: Fri Apr 18, 2008 6:53 am
by gregor
I'd try winding some thickish black thread round the inside of the ball & socket as a temporary measure to increase the friction. If that is possible- just a thought experiment.
Re: OEM Mirrors
Posted: Fri Apr 18, 2008 4:58 pm
by marecycling
Hey Gypsy,
Would you have a part number for those mirrors?
Re: OEM Mirrors
Posted: Fri Apr 18, 2008 11:45 pm
by OU812
Re: OEM Mirrors
Posted: Fri Apr 18, 2008 11:53 pm
by GypsyRR
marecycling wrote:Hey Gypsy,
Would you have a part number for those mirrors?
I tried to look it up in the parts catalog and although they show both the oval & round mirror, they do not list the part number.
SEE PARTS PAGE HERE
So I checked beemerboneyard too, and they have a used one from a 1200C for $15.00. So maybe the round ones are from earlier years???? You have to get that bush part (listed as number 2 in the picture) too if you want to put the mirror on an R1150R.
SEE BEEMBERBONEYARD 1200C MIRROR HERE
I guess Steve is right - I can't help you with the part number, but I did provide proof that they came from a C. Steve, get off the pain killers.
Re: OEM Mirrors
Posted: Sat Apr 19, 2008 9:26 am
by OU812
Sorry, over medicated.
