Page 1 of 1
Plastic Injector Covers
Posted: Fri Aug 08, 2008 11:26 pm
by sattwood
I've seen some bikes with what look like plastic BMW OEM covers for the injectors. Rumor has it that they only cost about $4.00 each. Has anyone seen these. The goal is to protect the injectors from junk flying up from the road.
Thanks....Steve
Re: Plastic Injector Covers
Posted: Fri Aug 08, 2008 11:37 pm
by owldaddy
You can find them at your dealer, I bought mine a few years ago, I think they were about $5. I believe they are standard items on the GS.
Don
Re: Plastic Injector Covers
Posted: Sat Aug 09, 2008 7:35 am
by jm1515
PN 13 54 1 341 589 for the Left side
PN 13 54 1 341 590 for the Right Side $4 each...
Re: Plastic Injector Covers
Posted: Sun Aug 10, 2008 7:57 pm
by rockstercliff
I believe there was a thread some time ago about these, anyway, I put these on my Rock, and they are not real secure, 1 kept popping off. So I drilleed the front square corners with a small hole, and installed and tierapped them so I have to cut the tieraps to remove. No problem as I always carry a few in the spare parts kit.
Re: Plastic Injector Covers
Posted: Mon Aug 11, 2008 4:40 am
by riceburner
owldaddy wrote:You can find them at your dealer, I bought mine a few years ago, I think they were about $5. I believe they are standard items on the GS.
Don
They're standard on the R1100RS.
Also - what Cliff said - the right side one can very easily be flicked off by your trouser leg so tie-wrapping them is a good idea. They never have to be removed for servicing (unless you're dismantling the injector).
Re: Plastic Injector Covers
Posted: Mon Aug 11, 2008 9:59 pm
by sattwood
Thanks guys! I appreciate the info!
--Steve