BMW R1200R R1150R/T F800 K1200R R1100R/T R1250R RnineT Message Board

Hello Forum
A Newbie needs help.
I bought the 2004 ROC used. I didn't notice that it had no centre stand.
Every BMW from my r6o to r1100r had a centre stand. Bummer!
It seems you can buy the stand and the pieces for about $350 from BMW.
Before I rush in ....errr ..I thought I would ask for directions ......
(I installed peg lowers GREAT!! Suburban says that is not a problem.)
Thanks for any help or advice
Bubbac

Yes, easy Do It Yourself project. Helps to have an assistant holding bike upright as you attach the centerstand.

Use plenty of anti-sieze for the pivoting surfaces.

Buy a spring puller for the installation if you don't already have one. Attaching the centerstand spring was the most difficult part of process.

Check ebay or www.beemerboneyard.com as yu might find one there at less cost.

+1 for beemerboneyard. That's where I got mine for install on Edition 80 Rockster.

GREAT
Thanks for the encouragement and the contact to BONEYARD.
I am on their parts wanted contact list.
The rockster is a real tourer.
Cheers
Bubba C