Has anyone put an RB clutch in their R? If so, which one did you install....the street 360 or the four paw?
Any feedback on this seemingly nice clutch would be appreciated.
http://www.rbracing-rsr.com/bmw_clutches.html
Thanks in advance!
RB Clutch
Moderator: Moderators
- iowabeakster
- Quadruple Lifer
- Posts: 1962
- Joined: Mon Mar 21, 2005 5:43 am
- Location: iowa city, ia
Re: RB Clutch
A while back, I remember somebody needed a new clutch and had ordered one (I thought his name was Keith). He was not a regular poster on this board. The clutches are hand built to order and it was going to take a few weeks for delivery. I was really looking forward to hearing his feedback.
Either I missed it, or he never posted about it again.
I can't see any advantage to a "grabbier" clutch like the 4 paw, with a stock motor. If you've done major mods, with major horsepower, and you ride a lot of track days, it would make sense. They say it's fine for street use though. I would forsee myself having slow speed crashes at the gas station with a grabby clutch and a tall 1st gear.
Either I missed it, or he never posted about it again.
I can't see any advantage to a "grabbier" clutch like the 4 paw, with a stock motor. If you've done major mods, with major horsepower, and you ride a lot of track days, it would make sense. They say it's fine for street use though. I would forsee myself having slow speed crashes at the gas station with a grabby clutch and a tall 1st gear.
I was dreaming when I wrote this, forgive me if it goes astray...
-
boxermania
- Quadruple Lifer
- Posts: 3644
- Joined: Thu Mar 17, 2005 6:37 pm
- Location: Baton Rouge, LA.....aproaching retirement
Re: RB Clutch
The RB clutch disc is far superior than the OEM, both in construction and torque capacity, however, the most important thing is the springs to minimize the clutch engagement snap. A worthy consideration considering how tedious is the clutch change process.
Member #312
06 Suzuki Burgman 650 "state of flux"
79 CBX
06 Suzuki Burgman 650 "state of flux"
79 CBX
Re: RB Clutch
I ordered a street 360 last June. Finally gave up and cancelled the order in September. I had read in a Harley user site that RB could be sort of "prickly" so I tried to be as polite as possible, only called them twice in three months, and sent one email enquiring about my order. I was told in July that the man fabricating the part was putting the finishing touches on the batch, so at least with me, RB Racing was not very straight forward. Ended up just putting the old disc back in. Still had serviceable life left, and the splines looked pretty good. Over on the ADV site, someone was talking about making replacement input shafts that would engage the disc fully for about 1000 dollars, but I didn't follow up on that.
Tedious process is an understatement, thinking about trading it in on a Harley Crossbones, maybe get something a little more reliable.
Tedious process is an understatement, thinking about trading it in on a Harley Crossbones, maybe get something a little more reliable.
Re: RB Clutch
http://www.rbracing-rsr.com/bmw_clutches.html
Thanks Twin Dave an interesting link which reveals some truth regarding
the lack of clutch robustness in BMW's, in pictures...
Nice name but its not me ...
Thanks Twin Dave an interesting link which reveals some truth regarding
the lack of clutch robustness in BMW's, in pictures...
Nice name but its not me ...
- twindave
- Basic User
- Posts: 117
- Joined: Sat Apr 08, 2006 12:54 am
- Location: Sierra Foothills, California
Re: RB Clutch
Well, I talked to a few people(a lady and a gentleman) at RB RACING, regarding a new clutch for my R. I detected quite an attitude...hahaha...It was funny to say the least.
They didn't seem to like my questions and acted like they were doing me a favor, and all I asked were valid questions as to which clutch would be the best fit for my needs, total cost and lead time. So much for cutomer service.
I smell trouble, so I guess I'm going to pass on the RB clutch.
It's too bad because it appears to be a superior clutch over the OEM.
I wonder if anyone else makes a similar clutch?
They didn't seem to like my questions and acted like they were doing me a favor, and all I asked were valid questions as to which clutch would be the best fit for my needs, total cost and lead time. So much for cutomer service.
I smell trouble, so I guess I'm going to pass on the RB clutch.
It's too bad because it appears to be a superior clutch over the OEM.
I wonder if anyone else makes a similar clutch?
Know it, Love it, Ride it