New guy here

Topics related to the ownership, maintenance, equipping, operation, and riding of the R1150R.

Moderator: Moderators

User avatar
peels
Basic User
Posts: 1121
Joined: Wed Jun 26, 2013 11:12 am
Location: Southeast Iowa, USA.

Re: New guy here

Post by peels »

I've not been around many boxer engines that dont make some valve noise. NEWER High end porsche excluded. :) but vw subaru, bmw yeah...ticky lil buggers.

Have fun, enjoy the bike!
2002 R1150R. Helmets save more lives than loud pipes.
User avatar
Ol' Jeffers
Member
Posts: 255
Joined: Thu Apr 22, 2010 8:04 am
Donating Member #: 0
Location: Aylesford, SE England.

Re: New guy here

Post by Ol' Jeffers »

I have a 2001 with only around 15,000 miles on it now! Love it!
Handling is sublime and the ability to brake well into a curve is welcome, although, thankfully, not often required!
It's a push-rod engine so it will be a little noisy, the left pot 'tick' is common. I have an excellent private engineer
who does everything necessary without having to be asked....he'll spot a fault if I don't! Being sightly deaf and
always wearing earplugs when I ride cancels out much of the noise!
No ABS on mine....but I like it that way! I've been riding too long now to require help when I brake!
It's a whole different ball park from any Honda.....better in some respects and less sophisticated in others and
certainly quirky. Not a bad thing.
There is a wealth of experience on this forum and you can learn a lot if you need to. Even if you're a capable
engineer some of the jobs that you may have to do may just need a bit of guidance so you can get them done in
the best fashion.
Welcome to the forums and enjoy the ride!!
OJ........everybody's pal!!
User avatar
Arbreacames
Basic User
Posts: 326
Joined: Sun Mar 20, 2005 7:38 pm
Donating Member #: 0
Location: Yorktown, VA

Re: New guy here

Post by Arbreacames »

BMWTEK21 wrote: -i also have a light tick when the engine is at hot idle. Its from the left side cylinder and is only heard at idle.
That ticking noise is the chain tensioner. They all do that to some extent and there is a chain tensioner upgrade that comes from the 1200 engine that quiets it down. When I bought mine used in 2004, it was so loud that I though I had a bad bearing. Fortunately, an updated tensioner took care of that noise.
Carlos D.
User avatar
peels
Basic User
Posts: 1121
Joined: Wed Jun 26, 2013 11:12 am
Location: Southeast Iowa, USA.

Re: New guy here

Post by peels »

Arbreacames wrote:
BMWTEK21 wrote: -i also have a light tick when the engine is at hot idle. Its from the left side cylinder and is only heard at idle.
That ticking noise is the chain tensioner. They all do that to some extent and there is a chain tensioner upgrade that comes from the 1200 engine that quiets it down. When I bought mine used in 2004, it was so loud that I though I had a bad bearing. Fortunately, an updated tensioner took care of that noise.

havent heard that one yet. Mine ticks, but not terribly. seems to do it when cold, braking hard to a stoplight. maybe worth a look...

is there a link to a thread for the swap with part #'s? thanks! ill get googling though...maybe find it.
2002 R1150R. Helmets save more lives than loud pipes.
User avatar
Arbreacames
Basic User
Posts: 326
Joined: Sun Mar 20, 2005 7:38 pm
Donating Member #: 0
Location: Yorktown, VA

Re: New guy here

Post by Arbreacames »

It looks like Boxer already did the upgrade: viewtopic.php?f=18&t=4657&start=0
Carlos D.
BMWTEK21
Basic User
Posts: 11
Joined: Mon Oct 07, 2013 7:30 pm
Donating Member #: 1
Location: Atlanta, Ga

Re: New guy here

Post by BMWTEK21 »

Arbreacames wrote:It looks like Boxer already did the upgrade: viewtopic.php?f=18&t=4657&start=0

Nice find! Thanks!
BMWTEK21
Basic User
Posts: 11
Joined: Mon Oct 07, 2013 7:30 pm
Donating Member #: 1
Location: Atlanta, Ga

Re: New guy here

Post by BMWTEK21 »

Looks like most of the noise I'm hearing is worn throttle shafts, mainly so on the right side. I would imagine this is also creating a vacuum leak and only exacerbating the
already common surging problem. I've ordered the build kits from Bing and will be tearing into both TB's soon. Looks like a very straighforward process. Any other high miler's here that
have rebuilt their TB's?

-Ben
User avatar
Boxer
Lifer
Posts: 3402
Joined: Fri Mar 18, 2005 9:16 am
Donating Member #: 2
Location: Atmore, Alabama

Re: New guy here

Post by Boxer »

Ben,
Vann (WNCBMW) had his TBs done last year i believe. If he reads this he will chime in and correct me if I'm wrong and maybe explain what it entailed. And yes, I did the upgrade on the cam chain tensioner but I seem to recall someone telling me about another part of that tensioning system that gets worn over time, and that may be what some of the noise is.
User avatar
towerworker
Lifer
Posts: 2369
Joined: Sun Jan 08, 2006 8:11 pm
Donating Member #: 575
Location: Staunton Virginia

Re: New guy here

Post by towerworker »

Ben, Boxer was very good about maintenance on his bike. But he may have slacked off a bit concerning keeping the antifreeze in the tankside radiators serviced on a regular basis. Might want to check on that. Very important.
The Older I Get, The Less I know. (in honor of MikeCam
'05 RT
'04 R
'03 R
CB750
KZ750
HD 350 Sprint
User avatar
angellr
Moderator
Posts: 1385
Joined: Sun Apr 25, 2010 3:17 pm
Donating Member #: 860
Location: Salt Lake City

Re: New guy here

Post by angellr »

towerworker wrote:Ben, Boxer was very good about maintenance on his bike. But he may have slacked off a bit concerning keeping the antifreeze in the tankside radiators serviced on a regular basis. Might want to check on that. Very important.
Boxer is also a master chef when it comes to cooking up small game: grouse, squirrels and of course snipe.
-Bob-

2014 R1200R - Dark White
2007 R1200R - SOLD
BMWTEK21
Basic User
Posts: 11
Joined: Mon Oct 07, 2013 7:30 pm
Donating Member #: 1
Location: Atlanta, Ga

Re: New guy here

Post by BMWTEK21 »

towerworker wrote:Ben, Boxer was very good about maintenance on his bike. But he may have slacked off a bit concerning keeping the antifreeze in the tankside radiators serviced on a regular basis. Might want to check on that. Very important.
Thanks! I know this is an oft over looked item. I'll check them immediately and report back :)
User avatar
Boxer
Lifer
Posts: 3402
Joined: Fri Mar 18, 2005 9:16 am
Donating Member #: 2
Location: Atmore, Alabama

Re: New guy here

Post by Boxer »

course snipe
I resemble that comment. :badgrin:

I spoke with Ben on the phone last night and it was a real thrill hearing about my old ride from someone who appreciates her as much as i did.
User avatar
peels
Basic User
Posts: 1121
Joined: Wed Jun 26, 2013 11:12 am
Location: Southeast Iowa, USA.

Re: New guy here

Post by peels »

angellr wrote:
towerworker wrote:Ben, Boxer was very good about maintenance on his bike. But he may have slacked off a bit concerning keeping the antifreeze in the tankside radiators serviced on a regular basis. Might want to check on that. Very important.
Boxer is also a master chef when it comes to cooking up small game: grouse, squirrels and of course snipe.
FYI...sometime last year as a noob-before buying the bike...I was perusing this forum, and saw "check your coolant" in a thread...i had it typed into google search, but then thought "hey these are air cooled bikes... internet A-HOLES" before clicking LOLOLOL well done

oh man...love me some snipe though!
2002 R1150R. Helmets save more lives than loud pipes.
User avatar
peels
Basic User
Posts: 1121
Joined: Wed Jun 26, 2013 11:12 am
Location: Southeast Iowa, USA.

Re: New guy here

Post by peels »

Arbreacames wrote:It looks like Boxer already did the upgrade: viewtopic.php?f=18&t=4657&start=0
also...I had'nt read through all that in the link. FABULOUS write up MY compliments to "boxer". I have added this to my "to do" list.

thanks.
2002 R1150R. Helmets save more lives than loud pipes.
Post Reply