Broken luggage
Moderator: Moderators
Broken luggage
Last night I was clipping my luggage onto the bike in a pitch black garage. I didn't realize that I had the bags locked and I accidentally broke off the red latch that locks the bags shut. It shuts and latches to the bike but there's no way to lock it. Am I out of luck or can this be fixed?
Re: Broken luggage
There was an article about a year ago in BMW ON on how to fix this exact problem. If you PM me your email, I can send a copy to you either in .jpg format or as a PDF file.jred wrote:Last night I was clipping my luggage onto the bike in a pitch black garage. I didn't realize that I had the bags locked and I accidentally broke off the red latch that locks the bags shut. It shuts and latches to the bike but there's no way to lock it. Am I out of luck or can this be fixed?
2004 R1150R Black
I got it. Thanks.
I actually have a new problem. The same case (right side) doesn't clip properly into place. It's just barely touching the rear wheel. After examination, I found that one of the bolts that attaches the grab handle was missing and I thought that this might be causing the bag to tilt too far down. However, after replacing the bolt, the case is still touching the wheel. Has anyone ever had this problem? Is something bent out of place? It certainly doesn't look like it.
I actually have a new problem. The same case (right side) doesn't clip properly into place. It's just barely touching the rear wheel. After examination, I found that one of the bolts that attaches the grab handle was missing and I thought that this might be causing the bag to tilt too far down. However, after replacing the bolt, the case is still touching the wheel. Has anyone ever had this problem? Is something bent out of place? It certainly doesn't look like it.
It's impossible. The case cannot touch the rear wheel if the pillion foot is correctly located between the two plastic tabs on the case.
If it is, only one of two things can be wrong. The rear wheel has come adrift and is mis-aligned, or the bike's frame is seriously bent.
Check the foot and make sure it is correctly located between the tabs on the case. There is a bit of a technique to puting the cass on that usually involves locating the front hook first, the foot and tabs second, then the rear hook, making sure you push the hooks fully down so that the locking mechanism can engage without too much force.
Most lost cases are due to the lower foot not being engaged, allowing the case to swing and pop the top hooks.
If it is, only one of two things can be wrong. The rear wheel has come adrift and is mis-aligned, or the bike's frame is seriously bent.
Check the foot and make sure it is correctly located between the tabs on the case. There is a bit of a technique to puting the cass on that usually involves locating the front hook first, the foot and tabs second, then the rear hook, making sure you push the hooks fully down so that the locking mechanism can engage without too much force.
Most lost cases are due to the lower foot not being engaged, allowing the case to swing and pop the top hooks.
I ride an R1150GS Adventure with sidecar. IBA #39193
-
Boxerjonny
Sparky
I have just made a similar mistake and snapped off the red tab! Could you please email me the pdf aswell.
Kindest regards
John
[email protected]
I have just made a similar mistake and snapped off the red tab! Could you please email me the pdf aswell.
Kindest regards
John
[email protected]
-
Boxerjonny