Page 3 of 4
Re: Idea for Beakster sticker - Pls indicate quantity
Posted: Fri May 22, 2009 2:43 pm
by frozennorth
When I get the order form up, I'll have images of what the front and back look like on different colors. Oh, BTW, this time we also have
Navy Blue and something called Athletic Heather that looks gray to me

Re: Idea for Beakster sticker - Pls indicate quantity
Posted: Fri May 22, 2009 6:39 pm
by orojk
Count me in for one white short sleeve XL and one black long sleeve XL.
Re: Idea for Beakster sticker - Pls indicate quantity
Posted: Sat May 23, 2009 11:51 pm
by duckdave
+1
One Black, one white, SS, XL please.
Interested in a couple stickers, too.
Thanks,
-dd.
Re: Idea for Beakster sticker - Pls indicate quantity
Posted: Tue May 26, 2009 10:37 am
by jerrygriffies
If it's not too late I'd like to order a couple of shirts and siome stickers.
1- LS Black- Large
1- LS White- Large
1- SS White- Medium
1-SS Black- Medium
2- stickers
Let me know particulars.
~Jerry Griffies
Re: Idea for Beakster sticker - Pls indicate quantity
Posted: Tue May 26, 2009 12:12 pm
by frozennorth
jerrygriffies wrote:If it's not too late I'd like to order a couple of shirts and siome stickers.
1- LS Black- Large
1- LS White- Large
1- SS White- Medium
1-SS Black- Medium
2- stickers
Let me know particulars.
~Jerry Griffies
Jerry, as further up in this thread, I will notify everyone once we have pricing and provide a link to an order form . . . probably next week as I'm snowed under at work this week.
UPDATE ON THE STICKERS

Bikermeow has found a place that will run them on waterproof material, laser die cut, with the bird being reflective.

Re: Idea for Beakster sticker - Pls indicate quantity
Posted: Wed May 27, 2009 3:41 pm
by Boxer Briefs
A reflective bird, eh? That gives me an idea... perhaps some reflective tape on the middle digits of my gloves

Re: Idea for Beakster sticker - Pls indicate quantity
Posted: Wed May 27, 2009 3:46 pm
by frozennorth
Never thought of it that way

Re: Idea for Beakster sticker - Pls indicate quantity
Posted: Wed May 27, 2009 8:58 pm
by bikermeow
Just an update on the sticker order scene ..
1. bikermeow - 5
2. Hawkman - 5
3. Boxer Briefs - 2
4. rbmitchel - 4
5. Airman - 6
6. citrusbbee - 2
7. snowprick - 6
8. jaxter - 4
9. sweatmark - 4
10. photoguy - 2
11. Flashdog - 2
12. bimrluvr - 6
13. buff - 4
14. Canyon Runner - 5
15. Jaguar5 - 2
16. daveduck - 2
17. jerrygriffies - some?
18.
19.
Yes, i have asked for 3M reflective stickers for the design. FN is working on some mock-ups of the stickers as I understand it. Stay tuned .....

Re: Idea for Beakster sticker - Pls indicate quantity
Posted: Wed May 27, 2009 9:04 pm
by bransan
I will require 4 stickers.
We love Our T-shirts, and would love to have some stickers too.
Re: Idea for Beakster sticker - Pls indicate quantity
Posted: Wed May 27, 2009 9:32 pm
by snowprick
My understanding of this situation is that we are waiting for our vendor ( frozennorth) to post an order form so that we can all place our orders.
I think what is happening right now is causing confusion with all these different orders floating in.
I think our vendor can already see there are sufficient numbers out there to make it worthwhile.
I hope I am not speaking out of turn
Come on frozennorth we are all in the starting gate and itching to go

Re: Idea for Beakster sticker - Pls indicate quantity
Posted: Thu May 28, 2009 12:43 am
by bikermeow
Appreciate the airing of thoughts, Snowprick.
I would appreciate if those interested can keep their indication of the sticker order going. FN and I are using that as a basis for determining the total number of stickers to order without over-production. Please understand that it is tough to decide on a mass order without any indication of interest and demand by you fellas. It'll be disappointing if there is not enough stickers and more demand for it than what is indicated so far.
Cheers
Re: Idea for Beakster sticker - Pls indicate quantity
Posted: Thu May 28, 2009 1:58 am
by Airman
bikermeow wrote:Appreciate the airing of thoughts, Snowprick.
I would appreciate if those interested can keep their indication of the sticker order going. FN and I are using that as a basis for determining the total number of stickers to order without over-production. Please understand that it is tough to decide on a mass order without any indication of interest and demand by you fellas. It'll be disappointing if there is not enough stickers and more demand for it than what is indicated so far.
Cheers
Do we have any idea what they will cost ? I might order more depending on the projected cost. Is there a minimum order needed ?
Re: Idea for Beakster sticker - Pls indicate quantity
Posted: Thu May 28, 2009 9:44 am
by bikermeow
I'm leaving pricing to FN and Doug; I just do the procurement

Stay tuned, folks,.... the man is snowed in.

Re: Idea for Beakster sticker - Pls indicate quantity
Posted: Thu May 28, 2009 10:55 am
by frozennorth
Bikermeow, where did you get the picture of my vehicle last week in the freak snowstorm we got
Sorry all, but I'm really busy at work this week. I'll have the order form up next week, I'll work on it over the weekend if I get a chance. The cost on the stickers is probably going to be around $4.50 USD. Bikermeow assures me that they are going to be well produced

This accounts for production, shipping to me in Canada so I can be the central clearing house for shirts and stickers, the 3% hit on PayPal that most people use to pay, and accounts for the extras that we'll probably have left over. If we sell the full run (probably 100 or 150--70 have been accounted for) proceeds will go to Doug to help keep this "house of chat" going
Stay tuned . . .
FN
Re: Idea for Beakster sticker - Pls indicate quantity
Posted: Fri May 29, 2009 10:34 am
by bikermeow
frozennorth wrote:Bikermeow assures me that they are going to be well produced
FN
GLUP!!!!!!!! It's just stickers; not some fancy billet-throttle-body-cum-footpeg-holder .... I trust the 3M quality 
Re: Idea for Beakster sticker - Pls indicate quantity
Posted: Fri May 29, 2009 1:16 pm
by jerrygriffies
frozennorth wrote:jerrygriffies wrote:If it's not too late I'd like to order a couple of shirts and siome stickers.
1- LS Black- Large
1- LS White- Large
1- SS White- Medium
1-SS Black- Medium
2- stickers
Let me know particulars.
~Jerry Griffies
Jerry, as further up in this thread, I will notify everyone once we have pricing and provide a link to an order form . . . probably next week as I'm snowed under at work this week.
UPDATE ON THE STICKERS

Bikermeow has found a place that will run them on waterproof material, laser die cut, with the bird being reflective.

Can change mu "some?" to 2- Stickers - jg
Re: Idea for Beakster sticker - Pls indicate quantity
Posted: Fri May 29, 2009 3:05 pm
by Airman
bikermeow wrote:frozennorth wrote:Bikermeow assures me that they are going to be well produced
FN
GLUP!!!!!!!! It's just stickers; not some fancy billet-throttle-body-cum-footpeg-holder .... I trust the 3M quality 
Right. The idea is to make some visabilty when we're out and about. I'm thinking of making a couple of "Airman" stickers to go with them. Some to the ADV people do this and have a great deal of fun meeting people who access the ADVRider site and recognise the logo and name.
Re: Idea for Beakster sticker - Pls indicate quantity
Posted: Fri May 29, 2009 3:26 pm
by suzuki
Put me in for 3 stickers Suzuki
Re: Idea for Beakster sticker - Pls indicate quantity
Posted: Tue Jun 09, 2009 10:35 am
by bikermeow
Just an update, folks, first prototype of sticker is out; ... won't be long now.
Stay tuned ................

Re: Idea for Beakster sticker - Pls indicate quantity
Posted: Tue Jun 09, 2009 11:54 am
by frozennorth
Hello all:
Please note that there is now a new post that has a link to order shirts and stickers
Thanks
FN