Page 1 of 1

ABS Question

Posted: Wed Sep 10, 2008 7:16 pm
by macx
Have just started riding my "new" 04 r1150ra.
25k miles

Did spend some "quality time" with my rider's manual -
there's as many switches, buttons, and indicator lights
on that as there is on my car!

Anyway, have notice that the brake warning light flashes
for maybe 30 seconds after I start the bike cold.

Then the light goes out, doesn't flash any more, and the
brakes seem to work just fine.

Is that a problem, or normal? I hope it's not a symptom of
that ABS unit going out? Or is the system just building pressure?

Thanks for any info!

Re: ABS Question

Posted: Wed Sep 10, 2008 7:33 pm
by bmwr1150rbmw
That is exactly what is supposed to happen. It turns off when you reach 2-3 mph. If that sequence you described changes, then you have a problem.

Re: ABS Question

Posted: Wed Sep 10, 2008 9:00 pm
by macx
Thanks!! MAJOR relief! :!: Understand that's an expensive system to repair.

Didn't notice anything about that particular situation when I read thru the manual.

Happy Motoring All!!

Re: ABS Question

Posted: Thu Sep 11, 2008 3:22 am
by riceburner
The ABS system will flash the light until the front wheel has done a complete rotation - this is the ABS system calibrating itself (or something).